HIKVISION DS-7716NXI-I4/16P/4S - Chapter 18 System Maintenance; Storage Device Maintenance; Configure Disk Clone

DS-77xxNXI-I4/16P/4S NVR User Manual
UM DS-77xxNXI-I4/16P/4S 050619NA 155
Chapter 18 System Maintenance
18.1 Storage Device Maintenance
18.1.1 Configure Disk Clone
Purpose
Select the HDDs to clone to eSATA HDD.
Before You Start
Connect an eSATA disk to the device.
1. Go to Maintenance > HDD Operation > HDD Clone.
Figure 18-1 HDD Clone
2. Check the HDD to clone. The selected HDD’s capacity must match the clone destination capacity.
3. Click Clone.
4. Click Yes on the pop-up message box to continue cloning.