DS-77xxNXI-I4/16P/4S NVR User Manual
UM DS-77xxNXI-I4/16P/4S 050619NA 33
Figure 2-2 Draw the Pattern
Connect at least four dots to draw the pattern.
Each dot can be connected once only.
3. Draw the same pattern again to confirm it. When the two patterns match, the pattern is configured
successfully.
If the two patterns are different, you must set the pattern again.
2.4 Log in to the Device
2.4.1
Login via Unlock Pattern
Only the
admin
user has permission to unlock the device.
Configure the pattern before unlocking. Refer to
Chapter 2.3 Configure Unlock Pattern for Login
.
1. Right click the mouse on the screen, and select the menu to enter the interface.
To Next Page
Loading...
