DS-77xxNXI-I4/16P/4S NVR User Manual
UM DS-77xxNXI-I4/16P/4S 050619NA 144
4. Click Apply.
16.2 Configuring Hik-Connect
Hik-Connect provides a mobile phone application and service platform page (www.hik-connect.com) to
access and manage your connected encoder, which provides convenient remote access to the
surveillance system.
Hik-Connect can be enabled via SADP software, GUI, or Web browser. We explain the GUI operation steps in
this section.
1. Go to Configuration > Network > Advanced Settings > Platform Access to enter the Hik-Connect
Settings page.
Figure 16-2 Hik-Connect Settings
2. Check Enable to activate the function. Then the Service Terms page pops up as below.
Figure 16-3 Service Terms
1) Create the verification code in the Verification Code text field.
2) Confirm the verification code.
3) Read Terms of Service and Privacy Policy before enabling the service.
To Next Page
Loading...
Need help?
General
