DS-77xxNXI-I4/16P/4S NVR User Manual
UM DS-77xxNXI-I4/16P/4S 050619NA 145
4) Click OK to save the settings and return to the Hik-Connect page.
Figure 16-4 Hik-Connect Settings
Hik-Connect is disabled by default.
The verification code is empty when the device leaves the factory.
The verification code must contain 6 to 12 letters or numbers and is case sensitive.
Every time you enable Hik-Connect, the Service Terms page pops up and you should read the Terms of
Service and Privacy Policy before enabling it.
3. If you want to customize the server, enable Custom and enter the Server Address in the text field.
4. Click Save.
5. After configuration, you can access and manage the DVR with your mobile phone or the Website
(www.hik-connect.com).
•
iOS Users: Scan the QR code below to download the Hik-Connect application for subsequent
operations.
•
Android Users: Scan the QR code below to download the Hik-Connect application for subsequent
operations. You must install
googleplay
on your Android mobile phone to skip to the address
successfully.
Figure 16-5 QR Code for iOS Users Figure 16-6 QR Code for Android Users
To Next Page
Loading...
