DS-77xxNXI-I4/16P/4S NVR User Manual
UM DS-77xxNXI-I4/16P/4S 050619NA 112
11.6.3
Configure Alarm Output
Trigger an alarm output when an alarm is triggered.
1. Go to System > Event > Normal Event > Alarm Output.
2. Select an alarm output item from the list and click .
3. Edit the alarm name.
4. Select the dwell time (the alarm duration) from 5s to 600s, or Manually Clear.
•
Manually Clear: Manually clear an alarm when one occurs. Refer to
Chapter 11.8 Trigger or Clear Alarm
Output Manually
for detailed instructions.
5. Set the arming schedule. Refer to
Chapter 11.1 Configure Arming Schedule
.
Figure 11-9 Alarm Output
6. (Optional) Click Copy to copy the same settings to other alarm output(s).
To Next Page
Loading...
