DS-77xxNXI-I4/16P/4S NVR User Manual
UM DS-77xxNXI-I4/16P/4S 050619NA 117
Figure 12-1 Human Body Detection
4) Click Draw Area to draw a quadrilateral in the preview window and then click Stop Drawing.
You can click Clear to clear the existing virtual line and re-draw it.
7. Set the arming schedule. Refer to
Chapter 11.1 Configure Arming Schedule
.
8. Set the linkage actions. Refer to
Chapter 11.2 Configure Alarm Linkage Actions
.
9. Click Apply to activate the settings.
12.2 Face Detection
Purpose
Face detection detects faces appearing in the surveillance scene. Linkage actions will be triggered when
a human face is detected.
1. Go to System > Event > Smart Event.
2. Click Face Capture.
To Next Page
Loading...
