HIKVISION DS-7700NXI-I/S Series User Manual

194 pages

To Next Page

Network Video Recorder

User Manual

default chapter6
- Table of Contents6
Chapter 1 Introduction17
- Front Panel17
- IR Remote Control Operations17
- Pairing (Enabling) the IR Remote to a Specific Device (Optional)18
- Unpairing (Disabling) an IR Remote from a Device19
- Troubleshooting22
- USB Mouse Operation23
- Rear Panel24
- DS-7700NXI-I/S Series24
- DS-7700NXI-I/P/S Series25
- Ds-7600Nxi-I/S26
- Ds-7600Nxi-I/P/S27
Chapter 2 Getting Started28
- Start up the Device28
- Activate the Device28
- Configure Unlock Pattern for Login29
- Login to the Device30
- Log in Via Unlock Pattern30
- Log in Via Password31
- Enter Wizard to Configure Basic Settings32
- Enter Main Menu36
- System Operation37
- Log out37
- Shut down the Device37
- Reboot the Device38
Chapter 3 Camera Management39
- Add the IP Cameras39
- Add the IP Camera Manually39
- Add the Automatically Searched Online IP Cameras40
- Manage Cameras for Poe Device40
- Add Poe Cameras40
- Add Non-Poe IP Cameras40
- Configure Poe Interface41
- Configure the Customized Protocols42
Chapter 4 Camera Settings44
- Configure OSD Settings44
- Configure Privacy Mask45
- Configure the Video Parameters46
- Configure the Day/Night Switch46
- Configure Other Camera Parameters46
Chapter 5 Live View48
- Start Live View48
- Digital Zoom48
- Positioning49
- Live View Strategy49
- Configure Live View Settings50
- Configure Live View Layout50
- Configure Auto-Switch of Cameras52
- Configure Channel-Zero Encoding52
- Use an Auxiliary Monitor53
Chapter 6 PTZ Control54
- PTZ Control Wizard54
- Configure PTZ Parameters54
- Set PTZ Presets, Patrols & Patterns55
- Set a Preset55
- Call a Preset56
- Set a Patrol57
- Call a Patrol58
- Set a Pattern59
- Call a Pattern60
- Set Linear Scan Limits60
- Call Linear Scan61
- One-Touch Park61
- Auxiliary Functions62
Chapter 7 Storage64
- Storage Device Management64
- Install the HDD64
- Add the Network Disk64
- Configure Esata for Data Storage66
- Storage Mode67
- Configure HDD Group67
- Configure HDD Quota69
- Recording Parameters70
- Main Stream70
- Sub-Stream71
- Picture71
- Anr71
- Configure Advanced Recording Settings71
- Configure Recording Schedule72
- Configure Continuous Recording74
- Configure Motion Detection Triggered Recording74
- Configure Event Triggered Recording74
- Configure Alarm Triggered Recording75
- Configure POS Event Triggered Recording75
- Configure Picture Capture76
- Configure Holiday Recording and Capture76
- Configure Redundant Recording and Capture77
Chapter 8 Disk Array79
- Create Disk Array79
- Enable RAID79
- One-Touch Creation80
- Manual Creation80
- Rebuild Array82
- Configure Hot Spare Disk82
- Automatically Rebuild Array82
- Manually Rebuild Array83
- Delete Array84
- Check and Edit Firmware84
Chapter 9 File Management86
- Search and Export Human Files86
- Search Human Files86
- Export Human Files86
- Search and Export Vehicle Files87
- Search Vehicle Files87
- Export Vehicle Files88
- Search History Operation89
- Save Search Condition89
- Call Search History89
Chapter 10 Playback90
- Playing Video Files90
- Instant Playback90
- Play Video90
- Play Tag Files91
- Play by Smart Search92
- Play Event Files94
- Play by Sub-Periods95
- Play Log Files96
- Play External File98
- Playback Operations98
- Normal/Important/Custom Video98
- Set Play Strategy in Important/Custom Mode98
- Edit Video Clips99
- Switch between Main Stream and Sub-Stream99
- Thumbnails View100
- Fast View100
- Digital Zoom100
Chapter 11 Event and Alarm Settings102
- Configure Arming Schedule102
- Configure Alarm Linkage Actions102
- Configure Auto-Switch Full Screen Monitoring103
- Configure Audio Warning104
- Notify Surveillance Center104
- Configure Email Linkage104
- Trigger Alarm Output104
- Configure PTZ Linkage105
- Configure Motion Detection Alarm106
- Configure Video Loss Alarm107
- Configure Video Tampering Alarm107
- Configure Sensor Alarms108
- Configure Alarm Input108
- Configure One-Key Disarming109
- Configure Alarm Output110
- Configure Exceptions Alarm112
- Trigger or Clear Alarm Output Manually113
Chapter 12 VCA Event Alarm115
- Human Body Detection115
- Face Detection116
- Vehicle Detection117
- Line Crossing Detection118
- Intrusion Detection120
- Region Entrance Detection122
- Region Exiting Detection123
- Unattended Baggage Detection125
- Object Removal Detection126
- Audio Exception Detection127
- Sudden Scene Change Detection129
- Defocus Detection130
- PIR Alarm130
- Enable Smart Search131
Chapter 13 Smart Search132
- Face Search132
- Vehicle Search132
- People Counting133
- Heat Map133
Chapter 14 Human Body Detection135
- View Engine Status135
- Human Body Search135
Chapter 15 POS Configuration136
- Configure POS Settings136
- Configure POS Connection136
- Configure POS Text Overlay140
- Configure POS Alarm142
Chapter 16 Network Settings143
- Configure TCP/IP Settings143
- Configuring Hik-Connect144
- Configure DDNS146
- Configure Pppoe147
- Configure NTP147
- Configure SNMP148
- Configure Email149
- Configure Ports151
Chapter 17 Hot Spare Device Backup153
- Set Hot Spare Device153
- Set Working Device154
- Manage Hot Spare System154
Chapter 18 System Maintenance156
- Storage Device Maintenance156
- Configure Disk Clone156
- Detection157
- Bad Sector Detection158
- HDD Health Detection159
- Search & Export Log Files160
- Search the Log Files160
- Export the Log Files162
- Import/Export IP Camera Configuration Files163
- Import/Export Device Configuration Files165
- Upgrade System166
- Upgrade by Local Backup Device166
- Upgrade by FTP166
- Restore Default Settings168
- System Service168
- Network Security Settings168
- Manage ONVIF User Accounts170
- Manage IP Camera Activation171
Chapter 19 General System Settings173
- Configure General Settings173
- Configure Date & Time174
- Configure DST Settings175
- Manage User Accounts175
- Add a User175
- Set the Permission for a User177
- Set Local Live View Permission for Non-Admin Users179
- Edit the Admin User180
- Edit the Operator/Guest User182
- Delete a User183
Chapter 20 Appendix184
- Glossary184
- Troubleshooting186

Need help?

Do you have a question about the HIKVISION DS-7700NXI-I/S Series and is the answer not in the manual?

HIKVISION DS-7700NXI-I/S Series Specifications

General

Video Compression	H.265+/H.265/H.264+/H.264
Video Output	HDMI and VGA outputs
Power Supply	100-240V AC, 50/60Hz
VGA Output	1920×1080/60Hz, 1280 × 1024/60Hz, 1280 × 720/60Hz, 1024 × 768/60Hz
Audio Output	1 channel, RCA (2.0Vp-p, 1kΩ)
Decoding Format	H.265/H.264
USB Interface	1 × USB 2.0
Working Temperature	-10 °C to 55 °C (14 °F to 131 °F)