EasyManuals Logo

HIKVISION DS-7700NXI-I/S Series User Manual

HIKVISION DS-7700NXI-I/S Series
194 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #43 background imageLoading...
Page #43 background image
Network Video Recorder User Manual
42
Figure 3-4 Protocol Management
Step 2 Select the protocol type of transmission and choose the transfer protocols.
Type: The network camera adopting custom protocol must support getting stream through
standard RTSP.
Path: you have to contact the manufacturer of the network camera to consult the URL
(uniform resource locator) for getting main stream and sub-stream.
The format of the URL is: [Type]://[IP Address of the network camera]:[Port]/[Path].
Example: rtsp://192.168.1.55:554/ch1/main/av_stream.
The protocol type and the transfer protocols must be supported by the connected IP camera.
Result:
Step 3 After adding the customized protocols, you can see the protocol name is listed in the
drop-down list.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HIKVISION DS-7700NXI-I/S Series and is the answer not in the manual?

HIKVISION DS-7700NXI-I/S Series Specifications

General IconGeneral
BrandHIKVISION
ModelDS-7700NXI-I/S Series
CategoryNetwork Hardware
LanguageEnglish

Related product manuals