HIKVISION DS-7700NXI-I/S Series User Manual

Network Video Recorder User Manual
143
 Check Enable DHCP to obtain IP settings automatically if a DHCP server is available in the
network.
 Valid range of MTU value is 500 to 9676.
Step 4 Click Apply.
16.2 Configuring Hik-Connect
Hik-Connect provides the mobile phone application and the service platform page
(www.hik-connect.com) to access and manage your connected encoder, which enables you to get a
convenient remote access to the surveillance system.
The Hik-Connect can be enabled via operation on SADP software, GUI and Web browser. We
introduce the operation steps on GUI in this section.
Step 1 Go to Configuration > Network > Advanced Settings > Platform Access to enter the
Hik-Connect Settings page.
Figure 16-2 Hik-Connect Settings
Step 2 Check the Enable to activate the function.
Then the Service Terms page pops up as below.

HIKVISION DS-7700NXI-I/S Series Specifications

General

Brand	HIKVISION
Model	DS-7700NXI-I/S Series
Category	Network Hardware
Language	English