EasyManuals Logo

HIKVISION DS-7700NXI-I/S Series User Manual

HIKVISION DS-7700NXI-I/S Series
194 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #147 background imageLoading...
Page #147 background image
Network Video Recorder User Manual
146
Step 2 Check Enable.
Step 3 Select DynDNS under DDNS Type.
PeanutHull and NO-IP are also available under DDNS Type, and required information should be
entered accordingly.
Step 4 Enter Server Address for DynDNS (i.e. members.dyndns.org).
Step 5 Under Device Domain Name, enter the domain name obtained from the DynDNS website.
Step 6 Enter the User Name and Password registered in the DynDNS website.
Figure 16-7 DDNS Settings
Step 7 Click Apply.
16.4 Configure PPPoE
If the device is connected to Internet through PPPoE, you need to configure user name and
password accordingly under System > Network > TCP/IP > PPPoE.
Contact your Internet service provider for details about PPPoE service.
16.5 Configure NTP
Purpose

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HIKVISION DS-7700NXI-I/S Series and is the answer not in the manual?

HIKVISION DS-7700NXI-I/S Series Specifications

General IconGeneral
BrandHIKVISION
ModelDS-7700NXI-I/S Series
CategoryNetwork Hardware
LanguageEnglish

Related product manuals