HIKVISION DS-7700NXI-I/S Series User Manual

Network Video Recorder User Manual
72
Refer to Chapter 7.1.2 Add the Network Disk for network HDD connections.
Step 1 Go to Storage > Recording Schedule.
Step 2 Select a camera.
Step 3 Check Enable Schedule.
Step 4 Select a Record Type. The record type can be Continuous, Motion Detection, Alarm, Motion |
Alarm, Motion & Alarm, and Event.
Different recording types are configurable.
 Continuous: scheduled recording.
 Event: recording triggered by all event triggered alarm.
 Motion: recording triggered by motion detection.
 Alarm: recording triggered by alarm.
 M/A: recording triggered by either motion detection or alarm.
 M&A: recording triggered by motion detection and alarm.
 POS Event: recording triggered by POS and alarm.
Step 5 Select a day and click-and-drag the mouse on the time bar to set the record schedule.
Figure 7-9 Record Schedule
Step 6 Repeat the above steps to schedule recording or capture for other days in the week.

HIKVISION DS-7700NXI-I/S Series Specifications

General

Brand	HIKVISION
Model	DS-7700NXI-I/S Series
Category	Network Hardware
Language	English