Network Video Recorder User Manual
81
Step 3 Select the available physical disk.
Step 4 Click OK.
Step 5 Click OK on the pop up message box “Do not unplug the physical disk when it is under
rebuilding”.
8.3 Delete Array
Deleting array will delete all the data saved in it.
Step 1 Go to Storage > RAID Setup > Array.
Figure 8-8 Array List
Step 2 Click of array to delete.
Figure 8-9 Attention
Step 3 Click Yes on the popup message box.
8.4 Check and Edit Firmware
Purpose
You can view the information of the firmware and set the background task speed on the Firmware
interface.
Step 1 Go to Storage > RAID Setup > Firmware.
To Next Page
Loading...
