HIKVISION DS-7700NXI-I/S Series User Manual

Network Video Recorder User Manual
41
Figure 3-3 PoE Settings

The PoE ports are enabled with the short distance mode by default.

The bandwidth of IP camera connected to the PoE via long network cable (100 to 300
meters) cannot exceed 6 MP.

The allowed max. long network cable may be less than 300 meters depending on different
IP camera models and cable materials.

When the transmission distance reaches 100 to 250 meters, you must use the CAT5E or
CAT6 network cable to connect with the PoE interface.

When the transmission distance reaches 250 to 300 meters, you must use the CAT6
network cable to connect with the PoE interface.
Step 3 Click Apply.
3.3 Configure the Customized Protocols
Purpose:
To connect the network cameras which are not configured with the standard protocols, you can
configure the customized protocols for them. The system provides 16 customized protocols.
Step 1 Click Protocol at the top taskbar to enter the protocol management interface.

HIKVISION DS-7700NXI-I/S Series Specifications

General

Brand	HIKVISION
Model	DS-7700NXI-I/S Series
Category	Network Hardware
Language	English