Network Video Recorder User Manual
139
Figure 15-6 Sniff Settings
15.1.2 Configure POS Text Overlay
Step 1 Go to System > POS Settings.
Step 2 Click Channel Linkage and Display tab.
Step 3 Select the linked channel to overlay the POS characters.
Step 4 Set the characters overlay for the enabled POS.
Character encoding format: currently the Latin-1 format is available.
Overlay mode of the characters to display in scrolling or page mode.
Font size and font color.
Display time (sec) of the characters. The value ranges 5 -3600 sec.
Timeout of POS event. The value ranges 5 -3600 sec. When the device has not received the
POS message over the defined time, the transaction is finished.
Step 5 In the Privacy Settings, set the POS privacy information to not display on the image, e.g., the
card number, or the user name, etc.
Result: The defined privacy information will be displayed in ***on the image instead.
Step 6 (optional) Check the checkbox to enable the Overlay POS in Live View. When this feature is
enabled, the POS information can be overlain on the live view image.
To Next Page
Loading...
Need help?
General
