Network Video Recorder User Manual
174
19.3 Configure DST Settings
The DST (daylight saving time) refers to the period of the year when clocks are moved one period
ahead. In some areas worldwide, this has the effect of creating more sunlit hours in the evening
during months when the weather is the warmest.
We advance our clocks ahead a certain period (depends on the DST bias you set) at the beginning
of DST, and move them back the same period when we return to standard time (ST).
Step 1 Go to System > General.
Step 2 Check the Enable DST.
Figure 19-3 DST Settings Interface
Step 3 Select the DST mode to Auto or Manual.
Auto: automatically enable the default DST period according to the local DST rules.
Manual: manually set the start time and end time of the DST period, and the DST bias.
DST Bias: set the time (30/60/90/120 minutes) offset from the standard time.
Example: The DST begins at 2:00 a.m. on the second Sunday of March and ends at 2:00 a.m. on the
first Sunday of November, with 60 minutes ahead.
Step 4 Click the Apply button to save the settings.
19.4 Manage User Accounts
Purpose:
The Administrator user name is admin and the password is set when you start the device for the
first time. The Administrator has the permission to add and delete user and configure user
parameters.
19.4.1 Add a User
Step 1 Go to System > User.
To Next Page
Loading...
Need help?
General
