Network Video Recorder User Manual
33
Figure 2-7 HDD Management
Step 4 To initialize the HDD, click the Init button. Initialization removes all the data saved in the HDD.
Step 5 Click Next. You enter the Camera Setup interface to add the IP cameras.
1) Click Search to search the online IP Camera. Before adding the camera, make sure the IP
camera to be added is in active status.
2) Click the Add to add the camera.
If the camera is in inactive status, you can select the camera from the list and click Activate to
activate the cameras.
Figure 2-8 Search for IP Cameras
Step 6 Enter the Platform Access and configure the Hik-Connect settings.
To Next Page
Loading...
Need help?
General
