DS-77xxNXI-I4/16P/4S NVR User Manual
UM DS-77xxNXI-I4/16P/4S 050619NA 107
You can set only one PTZ type for the linkage action each time.
11.3 Configure Motion Detection Alarm
Motion detection detects moving objects in the monitoring area and triggers an alarm.
1. Go to System > Event > Normal Event > Motion Detection.
Figure 11-4 Set Motion Detection
2. Select the camera to configure the motion detection.
3. Check Enable.
4. Set the motion detection area.
•
Full Screen: Click to set the full-screen motion detection for the image.
•
Customized Area: Use the mouse to click and drag on the preview screen to draw the customized
motion detection area(s).
You can click Clear to clear the current motion detection area settings and draw again.
5. Set sensitivity (0-100). The sensitivity allows you to calibrate how readily movement triggers the alarm.
To Next Page
Loading...
