HIKVISION DS-7716NXI-I4/16P/4S - Configure Poe Interface

DS-77xxNXI-I4/16P/4S NVR User Manual
UM DS-77xxNXI-I4/16P/4S 050619NA 43
Figure 3-2 Edit IP Camera
3. Set Adding Method to Manual.
•
Plug-and-Play: The camera is physically connected to the PoE interface. Its parameters cannot be
edited. You can go to System > Network > TCP/IP to change IP address of PoE port.
•
Manual: Add IP camera without physical connection via the network.
4. Manually enter the IP address, the administrator user name, and administrator password.
5. Click OK.
3.2.3 Configure PoE Interface
Purpose
When requiring long-distance PoE transmission (100 to 300 m), enable long distance mode for the PoE
channel.
1. Go to Camera > Camera > PoE Settings.
2. Enable or disable long network cable mode by selecting the relevant Long Distance or Short Distance
radio button.
•
Long Distance: Long-distance (100 to 300 meters) network transmissions via PoE interface.
•
Short Distance: Short-distance (<100 meters) network transmission via PoE interface.