DS-77xxNXI-I4/16P/4S NVR User Manual
UM DS-77xxNXI-I4/16P/4S 050619NA 53
Figure 5-4 Live View
2. Select the video output interface, e.g., HDMI/ VGA or channel-zero.
3. Select a window division mode from the toolbar.
4. Select a division window, and double-click on the camera on the list to set the camera to the window.
Enter the number in the text field to quickly search for the camera from the list.
You can also click-and-drag the camera to the desired window on the live view interface to set the
camera order.
Related Operation:
•
Click to start live view for all the channels.
•
Click to stop all live views.
5. Click Apply to save the settings.
5.4 Configure Cameras’ Auto-Switch
You can set the cameras’ auto-switch play in different display modes.
1. Go to System > Live View > General.
2. Set the video output interface, live view mode, and dwell time.
To Next Page
Loading...
