HIKVISION DS-7716NXI-I4/16P/4S - Sudden Scene Change Detection

DS-77xxNXI-I4/16P/4S NVR User Manual
UM DS-77xxNXI-I4/16P/4S 050619NA 130
12.11 Sudden Scene Change Detection
Purpose
Scene change detection detects the change of the surveillance environment affected by external factors
such as intentional camera rotation.
1. Go to System > Event > Smart Event.
2. Click Sudden Scene Change.
Figure 12-11 Sudden Scene Change
3. Select a Camera to configure.
4. Check Enable Sudden Scene Change Detection.
5. (Optional) Check Save VCA Picture to save the captured sudden scene change detection pictures.
6. Drag the Sensitivity slider to set the detection sensitivity. Sensitivity range: [1-100]. The higher the
value, the more easily the change of scene will trigger the alarm.
7. Set the arming schedule. Refer to Chapter 11.1 Configure Arming Schedule .
8. Set the linkage actions. Refer to Chapter 11.2 Configure Alarm Linkage Actions .
9. Click Apply.