DS-77xxNXI-I4/16P/4S NVR User Manual
UM DS-77xxNXI-I4/16P/4S 050619NA 47
4.2 Configure Privacy Mask
Purpose
The privacy mask can protect personal privacy by concealing parts of the image from view or recording
with a masked area.
1. Go to Camera > Privacy Mask.
2. Select the camera to set privacy mask.
3. Check the Enable checkbox to enable this feature.
4. Use the mouse to draw a zone on the window. The zones will be marked with different frame colors.
Figure 4-2 Privacy Mask Settings Interface
Up to four privacy mask zones can be configured, and the size of each area can be adjusted.
Related Operation
The configured privacy mask zones on the window can be cleared by clicking the corresponding Clear
Zone1-4 icons on the right side of the window, or click Clear All to clear all zones.
5. Click Apply to save the settings.
To Next Page
Loading...
