HIKVISION DS-7716NXI-I4/16P/4S - Trigger or Clear Alarm Output Manually

DS-77xxNXI-I4/16P/4S NVR User Manual
UM DS-77xxNXI-I4/16P/4S 050619NA 114
Figure 11-11 Exceptions Handling
4. Set the normal linkage and alarm output triggering. Refer to Chapter 10.2 Setting Alarm Linkage
Actions .
11.8 Trigger or Clear Alarm Output Manually
Purpose
A sensor alarm can be triggered or cleared manually. When Manually Clear is selected for an alarm output
dwell time, the alarm can be cleared only by clicking the Clear button.
1. Go to System > Event >Normal Event > Alarm Output.
2. Select the alarm output you want to trigger or clear.
3. Click Trigger/Clear to trigger or clear an alarm output.