Network Video Recorder User Manual
119
Chapter 11 Event and Alarm Settings
11.1 Configure Arming Schedule
Step 1 Select the Arming Schedule tab.
Step 2 Choose a day of the week and set the time period. Up to eight time periods can be set each day.
Time periods cannot repeat or overlapped.
Figure 11-1 Set Arming Schedule
Step 3 (Optional) To copy the same arming schedule of the current day to the other day (s) of the week or
holiday, you can click to copy the arming schedule settings.
Step 4 Click Apply to save the settings.
11.2 Configure Alarm Linkage Actions
Step 1 Click Linkage Action to set the alarm linkage actions.
To Next Page
Loading...
