Network Video Recorder User Manual
120
Figure 11-2 Set Linkage Actions
Step 2 Select the normal linkage actions, trigger alarm output, or trigger the recording channel.
Full Screen Monitoring
When an alarm is triggered, the local monitor displays in full screen the video image from the
alarming channel configured for full screen monitoring.
If alarms are triggered simultaneously in several channels, their full-screen images will be switched
at an interval of 10 seconds (default dwell time). A different dwell time can be set by going to
System>Live View > Full Screen Monitoring Dwell Time.
Auto-switch will terminate once the alarm stops and return to the Live View interface.
Select the channel(s) you want to trigger full screen monitoring in Trigger Channel settings.
Audible Warning
It will trigger an audible beep when an alarm is detected.
Notify Surveillance Center
It will send an exception or alarm signal to the remote alarm host when an event occurs. The
alarm host refers to the PC installed with Remote Client.
To Next Page
Loading...
Need help?
General
