Network Video Recorder User Manual
181
Step 5 Click OK to set the new password. You can export the new GUID file to the U flash disk for
future password resetting.
When the new password is set, the original GUID file will be invalid. The new GUID file should be
exported for future password resetting. You can also enter the User>User Management interface to
edit the admin user and export the GUID file.
17.4.2 Reset Password by Security Questions
Before You Start
You have configured the security questions when you activate the device or edit the admin user
account. (Refer to Chapter 17.3.2 Configure Security Questions).
Step 1 On the user login interface, click Forgot Password.
Step 2 Select the password resetting type to Verify by Security Question.
Step 3 Input the correct answers of the three security questions.
Step 4 Click OK.
If the answers mismatch, the verification is failed.
Step 5 Create the new admin password on the Reset Password interface.
To Next Page
Loading...
Need help?
General
