Network Video Recorder User Manual
45
2.4 Login to the Device
2.4.1 Log in via Unlock Pattern
Only the admin user has permission to unlock the device.
Before you Start
Configure the unlock pattern before unlocking. Refer to Chapter 2.3 Configure Login Unlock
Pattern.
Step 1 Right click the mouse and select the menu to enter the interface.
Figure 2-3 Draw the Unlock Pattern
Step 2 Draw the pre-defined pattern to unlock and enter the menu operation.
If you have forgotten your pattern, select Forgot My Pattern or Switch User to enter the normal
login dialog box.
If the pattern you draw is different from the pattern you configured, try again.
If you draw the wrong pattern more than five times, the system will switch to the normal login
mode automatically.
2.4.2 Log in via a Password
Purpose:
To Next Page
Loading...
Need help?
General
