HIKVISION DS-7732NI-I4/24P User Manual

Network Video Recorder User Manual
57
3.5 Configure the Customized Protocols
Purpose
To connect the network cameras which are not configured with the standard protocols, you can
configure the customized protocols for them. The system provides 16 customized protocols.
Step 1 Go to More Settings > Protocol at the top taskbar to enter the protocol management interface.
Figure 3-5 Protocol Management
Step 2 Select the protocol type of transmission and choose the transfer protocols.
 Type: The network camera adopting custom protocol must support getting stream through
standard RTSP.
 Path: you have to contact the manufacturer of the network camera to consult the URL (uniform
resource locator) for getting main stream and sub-stream.
 The format of the URL is: [Type]://[IP Address of the network camera]:[Port]/[Path].
 Example: rtsp://192.168.1.55:554/ch1/main/av_stream.
The protocol type and the transfer protocols must be supported by the connected IP camera.
Step 3 Click OK to save the settings.
Result:

HIKVISION DS-7732NI-I4/24P Specifications

General

Brand	HIKVISION
Model	DS-7732NI-I4/24P
Category	Network Hardware
Language	English