Network Video Recorder User Manual
82
Step 3 When the eSATA type is set to Record/Capture, enter the storage device interface.
Step 4 Edit the property of the selected eSATA, or initialize it as required.
7.2 Storage Mode
7.2.1 Configure HDD Groups
Purpose
Multiple HDDs can be managed in groups. Video from specified channels can be recorded onto a
particular HDD group through HDD settings.
Step 1 Go to Storage> Storage Device.
Step 2 Check the checkbox to select the HDD to set the group.
Figure 7-4 Storage Device
Step 3 Click to enter the Local HDD Settings interface.
Figure 7-5 Local HDD Settings
To Next Page
Loading...
Need help?
General
