Network Video Recorder User Manual
156
Step 8 Click Apply to activate the settings.
14.2 Configure POS Alarm
Purpose
A POS event can trigger channels to start recording, or trigger full screen monitoring or an audio
warning, notifying the surveillance center, send e-mail, etc.
Step 1 Go to Storage > Recording Schedule.
Step 2 Set the POS event’s arming schedule.
Step 3 Go to System > POS.
Step 4 Click Event Linkage on the POS adding or editing interface.
Step 5 Select the normal linkage actions: full screen monitoring, audio warning, or send e-mail.
Step 6 Select one or more alarm output(s) to trigger.
Step 7 Select one or more channels to record or become full-screen monitoring when a POS alarm is
triggered.
Figure 14-8 Set Trigger Cameras of POS
Step 8 Click Apply to save the settings.
To Next Page
Loading...
