Network Video Recorder User Manual
123
11.4 Configure Video Loss Alarms
Purpose
Video Loss Detection detects video loss of a channel and takes alarm response action(s).
Step 1 Go to System> Event>Normal Event>Video Loss.
Figure 11-4 Set Video Loss Detection
Step 2 Select the camera to configure the video loss detection.
Step 3 Check Enable.
Step 4 Set the arming schedule. Refer to Chapter 11.1 Configure Arming Schedule.
Step 5 Set the linkage actions. Refer to Chapter 11.2 Configure Alarm Linkage Actions.
To Next Page
Loading...
