Network Video Recorder User Manual
141
Step 8 Set the linkage actions. Refer to Chapter 11.2 Configure Alarm Linkage Actions.
Step 9 Click Apply.
12.7 Unattended Baggage Detection
Purpose
The Unattended Baggage Detection Function detects the objects left over in a pre-defined region
such as the baggage, purses, dangerous materials, etc., and a series of actions can be taken when
the alarm is triggered.
Step 1 Go to System > Event > Smart Event.
Step 2 Click Unattended Baggage.
Figure 12-7 Unattended Baggage Detection
Step 3 Select a camera to configure.
Step 4 Check Enable Unattended Baggage Detection.
Step 5 Optionally, check Save VCA Picture to save the captured unattended baggage detection pictures.
Step 6 Follow these steps to set the detection rules and detection areas.
1) Select an Arming Region to configure. Up to 4 regions are selectable.
2) Drag the sliders to set Time Threshold and Sensitivity.
Time Threshold: The time of the objects are left in the region. If the value is 10, an alarm
is triggered after the object is left and stayed in the region for 10s. Its range is [5s-20s].
To Next Page
Loading...
Need help?
General
