Network Video Recorder User Manual
78
The park time can be set only via the speed dome configuration interface. The default value is 5s
by default.
Step 3 Click Stop Park (Quick Patrol), Stop Park (Patrol 1), or Stop Park (Preset 1) to inactivate it.
6.4 Auxiliary Functions
Before You Start
Make sure the connected IP camera supports the PTZ function and is properly connected.
Purpose
You can operate the auxiliary functions including light, wiper, 3D positioning, and center on the PTZ
control panel.
Step 1 Click on the quick settings toolbar of the PTZ camera’s Live View.
Step 2 The PTZ control panel displays on the right of the interface.
Step 3 Click Aux Function.
Figure 6-14 Aux Function Configuration
Step 4 Click the icons to operate the aux functions. See the table for the icon descriptions.
Table 6-1 Description of Aux Functions Icons
To Next Page
Loading...
Need help?
General
