Network Video Recorder User Manual
55
3.2.3 Configure PoE Interface
Purpose:
When it requires long-distance PoE transmission (100 to 300 m), you can enable long distance
mode for the PoE channel.
Step 1 Go to Camera > Camera >PoE Settings.
Step 2 Enable or disable long network cable mode by selecting Long Distance or Short Distance radio.
Long Distance: Long-distance (100 to 300 meters) network transmissions via PoE interface.
Short Distance: Short-distance (< 100 meters) network transmission via PoE interface.
Figure 3-4 PoE Settings
To Next Page
Loading...
Need help?
General
