Network Video Recorder User Manual
54
Follow the steps to add network cameras for device supporting PoE function.
3.2.1 Add PoE Cameras
Step 1 Connect PoE cameras to device PoE ports with network cables.
Step 2 Go to Camera > Camera > IP Camera to view camera image and information.
3.2.2 Add Non-PoE IP Cameras
You can disable the PoE interface by selecting the manual while the current channel can be used as
a normal channel and the parameters can also be edited.
Step 1 Go to Camera > Camera > IP Camera.
Step 2 Position the cursor on a window with no linked IP camera and click the button.
Figure 3-3 Edit IP Camera
Step 3 Select Adding Method as Manual.
• Plug-and-Play: The camera is physically connected to the PoE interface. Its parameters cannot be
edited. You can go to System > Network > TCP/IP to change IP address of PoE port. .
• Manual: Add IP camera without physical connection via network.
Step 4 Enter the IP address, the user name and password of administrator manually.
Step 5 Click OK.
To Next Page
Loading...
