HIKVISION DS-7732NI-I4/24P - Chapter 17 User Management and Security; Manage User Accounts; Add a User

Network Video Recorder User Manual
170
Chapter 17 User Management and Security
17.1 Manage User Accounts
Purpose
The Administrator user name is admin and the password is set when you start the device for the
first time. The Administrator has the permission to add and delete users and configure user
parameters.
17.1.1 Add a User
Step 1 Go to System > User.
Figure 17-1 User Management Interface
Step 2 Click Add to enter the operation permission interface.
Step 3 Input the admin password and click OK.
Step 4 In the Add User interface, enter the information for a new user, including User Name, Password,
Confirm (password), User Level (Operator/Guest), and User’s MAC Address.