Network Video Recorder User Manual
171
Figure 17-2 Add User
Strong Password Recommended–We highly recommend you create a strong password of your
own choosing (using a minimum of 8 characters, including at least three of the following categories:
upper case letters, lower case letters, numbers, and special characters) in order to increase the
security of your product. We also recommend that you reset your password regularly. Especially in
the high security systems, resetting the password monthly or weekly can better protect your
product.
User Level: Set the user level to Operator or Guest. Different user levels have different operating
permission.
Operator: An Operator user level has Two-way Audio permission in Remote Configuration and all
operating permissions in Camera Configuration by default.
Guest: The Guest user has no permission of Two-way Audio in Remote Configuration and only has
the local/remote playback in the Camera Configuration by default.
User’s MAC Address: The MAC address of the remote PC that logs onto the device. If it is
configured and enabled, it allows only the remote user with this MAC address to access the device.
Step 5 Click OK to finish adding the new user account.
Step 6 In the User Management interface, the added new user is displayed on the list.
To Next Page
Loading...
Need help?
General
