Network Video Recorder User Manual
106
Chapter 10 Playback
10.1 Play Video Files
10.1.1 Instant Playback
Instant Playback enables the device to play the recorded video files recorded in the last five
minutes. If no video is found, it means there is no recording during the last five minutes.
Step 1 On the Live View window of the selected camera, move the cursor to the window bottom to
access the toolbar.
Step 2 Click to start instant playback.
Figure 10-1 Playback Interface
10.1.2 Play Normal Video
Step 1 Go to Playback.
Step 2 Check one or more cameras in the camera list to start playing the video.
Step 3 Select a date in the calendar to start playing the video.
Step 4 Use the toolbar in the bottom part of the playback interface to control the playing and perform a
series of operations. Refer to Chapter 10.2 Playback Operations 8.2.
To Next Page
Loading...
Need help?
General
