Network Video Recorder User Manual
136
Step 5 Optionally, check Save VCA Picture to save the captured vehicle detection pictures.
Step 6 Set the arming schedule. Refer to Chapter 11.1 Configure Arming Schedule.
Step 7 Set the linkage actions. Refer to Chapter 11.2 Configure Alarm Linkage Actions.
Step 8 Configure rules, including Area Settings, Picture, Overlay Content, and Blacklist and Whitelist.
Area Settings: Up to 4 lanes are selectable.
Step 9 Click Save.
Refer to the Network Camera User Manual for detailed instructions for the vehicle detection.
12.3 Line Crossing Detection
Purpose
Line crossing detection detects people, vehicles, and objects crossing a set virtual line. The
detection direction can be set as bidirectional, from left to right or from right to left.
Step 1 Go to System > Event > Smart Event.
Step 2 Click Line Crossing.
Figure 12-3 Line Crossing Detection
Step 3 Select a camera to configure.
Step 4 Check the Enable Line Crossing Detection checkbox.
To Next Page
Loading...
Need help?
General
