Network Video Recorder User Manual
65
Step 2 Select the Live View strategy to Real-time, Balanced or Fluency.
5.2 Target Detection
In Live View mode, the target detection function can detect a human
motoion/face/vechicle/human body during the last 5 seconds and the following 10 seconds.
Step 1 In Live View mode, click Target Detection to enter the target detection interface.
Step 2 Check the checkbox to select different detection types: motion detection ( ), vehicle
detection ( ), face detection ( ), and human body detection ( ).
Step 3 Select the historical analysis ( ) or real-time analysis ( ) to obtain the results.
Figure 5-2 Target Detection
Step 4 The smart analysis results of the detection are displayed in the list. Optionally, click a result in list
to play the related video.
5.3 Configure Live View Settings
Live View settings can be customized. You can configure the output interface, dwell time for
screen to be shown, mute or turning on the audio, the screen number for each channel, etc.
Step 1 Go to System > Live View > General.
To Next Page
Loading...
Need help?
General
