Network Video Recorder User Manual
66
Figure 5-3 Live View-General
Step 2 Configure the Live View parameters.
Video Output Interface: Select the video output to configure.
Live View Mode: Select the display mode for Live View, e.g., 2*2, 1*5, etc.
Dwell Time: The time in seconds to wait between switching of cameras when using auto-switch
in Live View.
Enable Audio Output: Enable/disable audio output for the selected video output.
Volume: Adjust the Live View volume, playback and two-way audio for the selected output
interface.
Event Output: Select the output to show event video.
Full Screen Monitoring Dwell Time: Set the time in seconds to show alarm event screen.
Step 3 Click OK.
5.4 Configure Live View Layout
5.4.1 Configure Custom Live View Layout
Step 1 Go to System > Live View > View.
Step 2 Click Set Custom Layout.
Step 3 Click on the Custom Layout Configuration interface.
Step 4 Edit the layout name.
Step 5 Select a window division mode from the toolbar.
To Next Page
Loading...
Need help?
General
