Network Video Recorder User Manual
73
Figure 6-6 Call Preset (2)
6.3.3 Set Patrols
Purpose
Patrols can be set to move the PTZ to key points and have it stay there for a set duration before
moving on to the next key point. The key points are correspond to the presets.
Step 1 Click on the quick settings toolbar of the PTZ camera’s Live View.
Step 2 The PTZ control panel displays on the right of the interface.
Step 3 Click Patrol to configure patrol.
Figure 6-7 Patrol Configuration
Step 4 Select the patrol No. in the text field.
Step 5 Click Set to enter the Patrol Settings interface.
Figure 6-8 Patrol Settings
Step 6 Click to add a key point to the patrol.
To Next Page
Loading...
Need help?
General
