Network Video Recorder User Manual
91
7.9 Configure POS Event Triggered Recording
You can configure the recording triggered by the connected POS event, such as the transaction, etc.
Step 1 Go to System >POS Settings.
Step 2 Configure the POS and select the channel (s) in the Event Linkage to trigger the recording when
POS event occurs.
Refer to Chapter 13 Smart Analysis for details.
Step 3 Go to Camera > Encoding Parameters > Recording Parameters.
Step 4 Set the event main stream/sub-stream recording parameters for the camera.
Step 5 Go to Storage > Recording Schedule.
Step 6 Select the record type to POS Event.
Step 7 Set the schedule for the POS event triggered recording. Refer to Chapter 7.4 Configure Recording
Schedule for details.
7.10 Configure Picture Capture
The picture refers to the live picture capture in continuous or event recording type.
Step 1 Go to Storage > Capture Schedule > Advanced.
Step 2 Set the picture parameters.
Resolution: set the resolution of the picture to capture.
Picture Quality: set the picture quality to low, medium or high. The higher picture quality
results in more storage space requirement.
Interval: the interval of capturing live picture.
Capture Delay Time: the duration of capturing pictures.
Step 3 Go to Storage > Capture Schedule.
Step 4 Select the camera to configure the picture capture.
Step 5 Set the picture capture schedule. Refer to Chapter 7.4 Configure Recording Schedule for details.
7.11 Configure Holiday Recording and Capture
Purpose:
Follow the steps to configure the record or capture schedule on holiday for that year. You may
want to have different plan for recording and capture on holiday.
Step 1 Go to System > Holiday Settings.
To Next Page
Loading...
Need help?
General
