Network Video Recorder User Manual
28
1.2 IR Remote Control Operations
The device may also be controlled with the included IR remote control, shown in Figure 1-7.
In the Playback mode, the Up and Down
button is used to speed up and slow down
recorded video. The Left and Right button will
select the next and previous video files.
In live view mode, these buttons can be used
to cycle through channels.
In PTZ control mode, it can control the
movement of the PTZ camera.
Use to confirm selection in any of the menu
modes
It can also be used to check checkbox fields.
In Playback mode, it can be used to play or
pause the video.
In single-frame Playback mode, pressing the
button will advance the video by a single
frame.
In Auto-switch mode, it can be used to stop
/start auto switch.
Move the active selection in a menu. It will
move the selection up and down.
In Live View mode, it can be used to cycle
through different channels.
In the Playback mode: For
DS-9600NI-ST/RT/XT series, use ring to jump
30s forward/backward in video files. For
DS-8600NI-ST series, use outer ring to speed
up or slow down the record files and use inner
ring to jump 30s forward/backward in video
files.
In PTZ control mode, use to control the
movement of the PTZ camera.
To Next Page
Loading...
