HIKVISION DS-7732NI-I4/24P - 18.1.3 Bad Sector Detection

Network Video Recorder User Manual
184
Figure 18-3 S.M.A.R.T. Settings Interface
To use the HDD even when the S.M.A.R.T. checking has failed, check Continue to use the disk
when self-evaluation is failed checkbox.
18.1.3 Bad Sector Detection
Step 1 Go to Maintenance > HDD Operation > Bad Sector Detection.
Step 2 Select the HDD No. you want to configure in the dropdown list.
Step 3 Select All Detection or Key Area Detection as the detection type.
Step 4 Click the Self-Test button to start the detection.