Network Video Recorder User Manual
72
Step 2 The PTZ control panel displays on the right of the interface.
Step 3 Use the directional buttons on the PTZ control panel to wheel the camera to the location where
you want to set a preset, and the zoom and focus operations can be recorded in the preset as well.
Step 4 Click in the lower right corner of Live View to set the preset.
Figure 6-3 Set Preset
Step 5 Select the preset No. (1 to 255) from the drop-down list.
Step 6 Enter the preset name in the text field.
Step 7 Click Apply to save the preset.
Step 8 Repeat steps 2-6 to save more presets.
Step 9 (Optional) Click Cancel to cancel the location information of the preset.
Step 10 (Optional) Click in the lower right corner of Live View to view the configured presets.
Figure 6-4 View the Configured Presets
6.3.2 Call Presets
Purpose
A presets enables the camera to point to a specified position such as a window when an event
takes place.
Step 1 Click on the quick settings toolbar of the PTZ camera Live View.
Step 2 Click in the lower right corner of Live View.
Step 3 Select the preset No. from the drop-down list.
Step 4 Click Call to call it, or click in the lower right corner of Live View, and click the configured
preset to call it.
Figure 6-5 Call Preset (1)
To Next Page
Loading...
Need help?
General
