Network Video Recorder User Manual
160
Figure 15-5 Hik-Connect Settings
Hik-Connect is disabled by default.
The verification code is empty when the device leaves factory.
The verification code must contain 6 to 12 letters or numbers and is case sensitive.
Every time you enable Hik-Connect, the Service Terms page pops up and you should read
Terms of Service and Privacy Policy before enabling it.
Step 3 If you want to customize the server, enable Custom and enter the Server Address in the text field.
Step 4 Click Save.
Step 5 After configuration, you can access and manage the device by your mobile phone or by the
website (www.hik-connect.com).
For the iOS users, please scan the QR code below to download the Hik-Connect application for
the subsequent operations.
Figure 15-6 QR Code for iOS Users
For the Android users, please scan the QR code below to download the Hik-Connect
application for the subsequent operations. You must install googleplay on your Android mobile
phone to skip to the address successfully.
To Next Page
Loading...
