EasyManuals Logo

HIKVISION DS-7732NI-I4 User Manual

HIKVISION DS-7732NI-I4
324 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #202 background imageLoading...
Page #202 background image
Network Video Recorder User Manual
201
A Network Time Protocol (NTP) Server can be configured on your NVR to ensure the accuracy of
system date/time.
Step 1 Enter the Network Settings interface.
Menu >Configuration> Network
Step 2 Select the NTP tab to enter the NTP Settings interface, as shown in Figure 12-8.
Figure 12-8 NTP Settings Interface
Step 3 Check the Enable NTP checkbox to enable this feature.
Step 4 Configure the following NTP settings:
Interval: Time interval between the two synchronizing actions with NTP server. The unit is
minute.
NTP Server: IP address of NTP server.
NTP Port: Port of NTP server.
Step 5 Click the Apply button to save and exit the interface.
The time synchronization interval can be set from1 to 10080min, and the default value is 60min. If
the NVR is connected to a public network, you should use a NTP server that has a time
synchronization function, such as the server at the National Time Center (IP Address:
210.72.145.44). If the NVR is setup in a more customized network, NTP software can be used to
establish a NTP server used for time synchronization.
12.2.4 Configuring SNMP
Purpose:
You can use SNMP protocol to get device status and parameters related information.
Step 1 Enter the Network Settings interface.
Menu >Configuration> Network
Step 2 Select the SNMP tab to enter the SNMP Settings interface, as shown in Figure 12-9.

Table of Contents

Other manuals for HIKVISION DS-7732NI-I4

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HIKVISION DS-7732NI-I4 and is the answer not in the manual?

HIKVISION DS-7732NI-I4 Specifications

General IconGeneral
Playback modesPause, Play
Maximum resolution3840 x 2160 pixels
Alarm input channels16
Video input channels32 channels
Alarm output channels4
Video formats supportedH.264, H.265, MPEG4
Resolution at capture speed1920x1080@60fps, 3840x2160@30fps
On/off switchYes
Product colorBlack, Silver
Rack capacity1.5U
Operating temperature (T-T)-10 - 55 °C
Operating relative humidity (H-H)10 - 90 %
AC input voltage100 - 240 V
Power consumption (typical)20 W
RS-485 ports1
USB 2.0 ports quantity2
Ethernet LAN data rates10, 100 Mbit/s
HDD capacity- GB
HDD interfaceSerial ATA
Maximum storage capacity24 TB
Number of HDDs installed-
Total installed storage capacity12000 GB
Weight and Dimensions IconWeight and Dimensions
Depth390 mm
Width445 mm
Height70 mm

Related product manuals