Network Video Recorder User Manual
110
Figure 10-8 Edit User (Admin)
4. Edit the user password.
Operator and Guest
You can edit the user information, including user name, password, permission level and MAC
address.
Admin
You can export GUID, and edit the password, unlock pattern, MAC address, and reserved
email. You are allowed to edit the operator and guest permission by clicking on User
Management interface.
10.5 Configure More Settings
You can configure the device name, device No., auto logout time, menu output mode, etc.
Go to Menu → Configuration → General → More Settings.
Figure 10-9 More Settings
Device No.
The number is used for the remote and keyboard control. It can be set in the range of 1 to 255,
and the default No. is 255.
To Next Page
Loading...
