Network Video Recorder User Manual
57
Lock File when Export
Steps
1. Go to Menu → Export.
Figure 4-27 Export
2. Select the channels you want to search.
3. Configure the record type, file type start/end time.
4. Click Search to show the results.
Figure 4-28 Export- Search Result
5. Protect the record files.
1) Find the record files you want to protect, and then click which will turn to , indicating
that the file is locked.
Note
The record files of which the recording is still not completed cannot be locked.
2) Click to change it to to unlock the file and the file is not protected.
4.9.2 Set HDD Property to Read-only
Steps
1. Go to Menu → HDD.
To Next Page
Loading...
