Need help?Do you have a question about the HIKVISION DS-7108NI and is the answer not in the manual?
General| Model | DS-7108NI |
|---|---|
| Channels | 8 |
| HDD Bays | 1 |
| Recording Resolution | 8 MP/6 MP/5 MP/4 MP/3 MP/1080p/UXGA/720p/VGA/4CIF/DCIF/2CIF/CIF/QCIF |
| SATA | 1 SATA interface |
| Operating Humidity | 10% to 90% |
| Type | Network Video Recorder |
| Max HDD Capacity | 6TB |
| Video Output | 1 × VGA, 1 × HDMI |
| HDMI Output Resolution | 1920 × 1080/60Hz, 1280 × 1024/60Hz, 1280 × 720/60Hz, 1024 × 768/60Hz |
| VGA Output Resolution | 1920 × 1080/60Hz, 1280 × 1024/60Hz, 1280 × 720/60Hz, 1024 × 768/60Hz |
| Audio Input | 1-channel RCA |
| Audio Output | 1-channel RCA |
| Decoding Format | H.264 |
| Resolution | 8MP |
| Capability | 8-ch @1080p |
| Network Interface | 1 RJ45 10M/100M self-adaptive Ethernet interface |
| USB Interface | 2 USB 2.0 |
| Operating Temperature | -10 °C to +55 °C (+14 °F to +131 °F) |
Physical interfaces on the front and rear of the NVR.
Details how to connect and use a USB mouse with the NVR.
Explains the on-screen keyboard and its input methods.
Powering on, setting admin password, and basic configuration wizard.
Steps to add and connect IP cameras to the NVR.
Overview of the live view mode and its associated icons.
Describes various functions and controls available during live view.
How to customize live view display options like output interface and dwell time.
Steps to set up PTZ parameters for camera control.
Interface and controls for operating PTZ cameras.
How to configure PTZ camera movements like presets and patrols.
Configuring recording quality, resolution, and schedules for cameras.
Setting up recording for motion, alarms, and VCA events.
Various ways to play back recorded files: by channel, time, event, or tag.
Advanced playback features like smart search and frame-by-frame playback.
Procedures for backing up record files and managing storage devices.
Setting up motion, video loss, tampering, and sensor alarms.
Configuring responses to system exceptions and event display hints.
Setting up specific VCA features like face, vehicle, line crossing, and intrusion detection.
Searching for VCA events like faces, behaviors, plates, people counting, and heat maps.
Configuring general, Wi-Fi, DDNS, NTP, SNMP, and Email settings.
Checking network traffic, status, and performing delay tests.
Initializing HDDs and checking their status and health.
Configuring HDD quotas and setting up HDD error alarms.
Configuring camera display (OSD), privacy zones, and video parameters.
Viewing system info and managing log files.
Managing NVR configurations and upgrading the system firmware.
Resetting the NVR to its factory default configuration.
Configuring general device settings and Daylight Saving Time.
Creating, deleting, and managing user accounts and their permissions.
Definitions of terms and solutions for common NVR problems.
Summary of changes and lists of compatible IP cameras.
To Next Page